Load Bars are ideal when you dont need the features and higher load capacity of a full-sized roof rack.The Load Bars mount directly to the factory-fitted roof flush rail with Front Runners Rail Grip Feet.You can mount and remove the Rail Grip Load Bar kit in minutes.Can be used to mount Front Runner accessories where a low profile and smaller footprint is preferred.This kit uses the same strong, corrosion-free aluminum slats found in all Front Runner Racks.Simply slide the nuts into the t-slots for quick fitting and removal of accessories and equipment on both the top and bottom of the Load Bars.
- KRAS001T - Audi A3 Sportback (2004-2012) Load Bar Kit / Flush Rail - by Front Runner
2 x GOFR001 - Grab on Flush Rail Feet Material used:
2 x GOFR014 - Flush Rail Outer Grips / No. 6 - by Front Runner
2 x GOFR035 - Flush Rail Inner Grips / F - by Front Runner
1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Black epoxy powder-coated T6 aluminium
Approximate Installed Weight 6kg (14lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Width 275mm (11")
Length 1265mm (50")
Height 205mm (8")
Weight 7.2kg (15.8lbs)
*A PDF viewer is required to view the fitting instructions.