Peugeot 5008 (2016-Current) Slimline II Roof Rail Rack Kit

• This 1560mm/61.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 3 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Peugeot 5008. This system installs easily with off-road tough feet that grab onto the existing factory/OEM roof rails. No drilling is required.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.
• This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.
• For a stronger expedition-grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.
• Factory Rail Rack Kits are designed as a ‘light duty’ cargo solution. Please refer to your vehicle's owner manual for the manufacturer's recommended load rating and do not exceed these limits.
• For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and that all weight is distributed evenly across the rack.
• Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.
• Please contact us for advice on specific mounting solutions for your vehicle and use.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*

Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.

KRPE003T - Peugeot 5008 (2016-Current) Slimline II Roof Rail Rack Kit - by Front Runner




Consisting of:


3x GOFR001 - Rail Foot Base (Pair)
3x GOFR014 - Flush Rail Outer Grips / No. 6
3x GOFR034 - Flush Rail Inner Grips / E
2x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
1x RRSTA08 - SLII Tray - 1165mm(W)X1560mm(L)
1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm



Material Used:

Black epoxy powder - coated T6 aluminium

High strength steel



Approximate Installed Weight: 27.54kg (60.72lbs)